Teledyne 319R User Manual download pdf (Page 7)

319R Installation & Operation 2.0

TELEDYNE BROWN ENGINEERING

Analytical Instruments

Installation & Operation

Precautions

1. Read this chapter in its entirety before installing the unit.

2. Upon receipt of the instrument, inspect the entire unit for

damage. Notify the shipper if any damage is found. Check the

unit, probe, and included accessories for broken or loose parts.

3. The sample must be free of entrained solids and water. A high

humidity sample is ideal since it will prevent water loss from

the cell electrolyte.

4. The Micro-Fuel Cell sensor electrolyte is caustic. Do not

attempt to open or repair the sensor. Leaking or exhausted

sensors should be disposed of in accordance with local

regulations. Please refer to the Material Safety Data Sheet in the

Appendix to learn about potential hazards and corrective action

in case of accident.

5. Do not scratch, puncture, or damage the sensing membrane of

the Micro-Fuel Cell sensor. Damage to the membrane will

require replacement of the sensor.

Location & Mounting

The unit is designed to be panel-mounted in a general purpose area,

away from moisture and the elements. The unit should be installed at

viewing level in a sheltered area.

Refer to the Outline diagram (dwg. C-57490) for the physical dimen-

sions of the analyzer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

No comments

Teledyne 319R User Manual Page 7