Teledyne OT-3 User Manual download pdf (Page 31)

Trace Oxygen Analyzer Operation

Teledyne Analytical Instruments 23

Operation

4.1 Introduction

Once the analyzer has been mounted, the gas lines connected and

the electrical connections made, the Analyzer can be configured for your

application. This involves setting the system parameters:

• Defining the user selectable analysis ranges.

• Setting alarm setpoints.

• Calibrating the instrument.

All of these functions are performed via the front panel controls,

shown in Figure 4-1.

Analyzing for the trace oxygen level in the gas passing through the

cell block is the default mode of operation. As long as no front panel

buttons are being pressed the unit is analyzing.

Figure 4-1: Front Panel Control and Indicators

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

No comments

Teledyne OT-3 User Manual Page 31