Teledyne 6750 User Manual download pdf (Page 52)

Setup and Operation Model 6750

Teledyne Analytical Instruments 40

f. If the calibration is acceptable, select [OK] or

[CANCEL] if not acceptable.

The analyzer is now calibrated and ready for analysis.

4.4 Operation

After proper installation and calibration, the instrument is ready to

be placed “ON-LINE” for continuous operation.

Note: For any non–standard or specific operational procedures,

please refer to the “INSTALLATION” and “AS–BUILT”

drawings in the Appendix or any Addenda that

accompanies this manual. If applicable, the Appendix or

Addenda will include details on your specific application,

which may involve valving, stream sequencing, automatic

calibration, etc.

The RUN screen will automatically appear on the screen. It will

also appear whenever the computer is rebooted or the power is turned

off and back on again. Figure 4-3 shows the RUN screen and identifies

the data fields.

Figure 4-3: The RUN Screen

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

No comments

Teledyne 6750 User Manual Page 52