Rev. 2.1 SNACK O2 Analyzer Oxygen Gas Analyzer Owners Manual Teledyne Electronic Technologies Analytical Instruments 626.934.1500
Teledyne Analytical Instruments 10 Operation Drawing A Sample The following is a general procedure check list to start and use the gas analyzer. 1.
Teledyne Analytical Instruments 11 In the sleep mode, the analyzer will shut down the sensors and most of the processor functions in order to conser
Teledyne Analytical Instruments 12 depletes over time, the number of displayed chevrons will decrease. It is recommended that the sensor is replace
Teledyne Analytical Instruments 13 3. Gripping the entire analyzer, carefully turn over the analyzer and place it face-up on the flat surface. 4.
Teledyne Analytical Instruments 14 Sensor Installation/Replacement Procedure for the SNACK O2 Analyzer STEP 1 Place the analyzer face down on a so
Teledyne Analytical Instruments 15 Battery Replacement Over time the performance of the internal batteries may degrade and replacement of the batt
Teledyne Analytical Instruments 16 Troubleshooting Problem Solutions No display. • Check the position of the Power switch. • Check battery life. P
Teledyne Analytical Instruments 17 Analyzer does not function in the Ext. Power switch position. • Ensure the power supply is plugged into the Ext
Teledyne Analytical Instruments 18 Warranty Covered and Duration of Warranty Manufacturer warrants that the Products you have purchased from Manuf
Teledyne Analytical Instruments 19 Figures Figure 1 SNACK O2 ANALYZER
Teledyne Analytical Instruments 2
Teledyne Analytical Instruments 20 Figure 2
Teledyne Analytical Instruments 21 Figure 3
Teledyne Analytical Instruments 22
Teledyne Analytical Instruments 3 Table of Contents Table of Contents...3 Introduction...
Teledyne Analytical Instruments 4 Notice: Manufacturer shall not be liable for technical or editorial errors or omissions contained herei
Teledyne Analytical Instruments 5 Introduction Congratulations on the purchase of a SNACK O2 gas analyzer. We are confident that you will find this
Teledyne Analytical Instruments 6 Functions The analyzer has two modes of operation, the Program Mode and the Operate Mode. Power Switch Switch P
Teledyne Analytical Instruments 7 Operate Mode The Operate Mode is the default mode of operation when the Power Switch is placed in the on (Batt. o
Teledyne Analytical Instruments 8 Buttons Functions (Operate Mode) BUTTON FUNCTION MENU Places the analyzer into the Program Mode. ON (Light) Tur
Teledyne Analytical Instruments 9 the value. Samp. XX Sample duration – Pump will run for xx number of seconds then stop. Adjust using th
Comments to this Manuals