Teledyne GFC 7001E User Manual download pdf (Page 50)

Getting Started Model GFC7001E Carbon Dioxide Analyzer

Teledyne Analytical Instruments 50

3.5.4. FUNCTIONAL CHECK

After the analyzer’s components have warmed up for at least 60 minutes, verify that the software properly

supports any hardware options that were installed.

For information on navigating through the analyzer’s software menus, see the menu trees described in

Appendix A.1.

 Check to make sure that the analyzer is functioning within allowable operating parameters.

 Appendix C includes a list of test functions viewable from the analyzer’s front panel as well as their

expected values.

 These functions are also useful tools for diagnosing performance problems with your analyzer (see

Section 13.1.2).

 The enclosed Final Test and Validation Data Sheet (P/N 04307) lists these values before the

instrument left the factory.

To view the current values of these parameters press the following key sequence on the analyzer’s front

panel. Remember that until the unit has completed its warm-up these parameters may not have stabilized.

If your analyzer has an Ethernet card installed and your network is running a Dynamic Host Configuration

Protocol (DHCP) software package, the Ethernet option will automatically configure its interface with your LAN.

 However, it is a good idea to check these settings to make sure that the DHCP has successfully

downloaded the appropriate network settings from your network server (See Section 8.4.2).

 If your network is not running DHCP, you will have to configure the analyzer’s interface manually (See

Section 8.4.3).

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 320 321

No comments

Teledyne GFC 7001E User Manual Page 50