Teledyne MX300 User Manual download pdf (Page 12)

Introduction MX300

Teledyne Analytical Instruments 12

Note: Contact the factory for retrofitting an existing instrument

for 3-digit LCD display. For RS-232 reconfiguration, see

Section 2.1.5.

In addition to the above instrument configuration options, the

following optional equipment is available for your instrument:

• Universal Pole Mounting Clamp (P/N CP 2343)

• V-Mount Pole Clamp (P/N CP 2344)

• V-Mount Wall Adapter P/N B 647)

• 0-1 VDC Interface Cable (P/NB-75554)

• RS 232 Interface Cable (P/N B-75555)

1.4 Applications

The MX300 Portable oxygen analyzer is intended to continuously

measure and display the concentration of oxygen in a gas mixtures used

in medical applications such as Anesthesia, Respiratory therapy and is

intended for adult, pediatric and Neonatal populations.

The instruments may be used in verifying oxygen concentrations in

gas mixtures used in:

• Anesthesia

• Respiratory Therapy

• Neonatal Care

1.5 Theory of Operation

The MX300 monitor can be divided into two major functional

groups:

• R17MED Oxygen Sensor

• Signal Processing

The analyzer uses Teledyne Analytical Instruments Patented

R17MED oxygen sensor. The millovolt output signal from the sensor is

fed into the electronic signal processor, where it is used to calculate the

oxygen gas concentration and display it on the LCD screen. The data

from the sensor is compared to the alarm values set by the user, and

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

No comments

Teledyne MX300 User Manual Page 12