Teledyne 4060 User Manual download pdf (Page 59)

Series 4060 Operation

Teledyne Analytical Instruments 59

If user has LOGGED OUT, then only the following SUB MENU

procedures may be executed:

1. PASSWORD

2. LOGOUT (which only repeats the logout)

3. MODEL

Note however, that the instrument can still be used for analysis without

entering the password. To defeat security the password must be entered .

Note: If you use password security, it is strongly advised to keep a

copy of the password in a separate, safe location. If the

password is lost and security is enabled, the analyzer must

be cold-booted. Cold booting invalidates parameters

necessary for correct operation so they must be re-entered.

ENTERING A PASSWORD

To install a new password or change a previously installed password,

you must key in and ENTER the old password first. If the default

password is in effect it will be displayed as the default gausses for each

letter, pressing <Enter> for each letter of the password will enter the

default password for you.

To enter a password:

<any key> From the ANALYSIS SCREEN Enter MAIN MENU

setup by pressing an UP/DOWN KEY.

<UP/DOWN >Use the UP or DOWN key to scroll to

PASSWORD

________________________________________________

AUTOCAL

-> PASSWORD

________________________________________________

<Enter> Press <Enter> to activate the password function. Either

the default TAI password or AAA place holders for an

existing password will appear on screen.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 78 79

No comments

Teledyne 4060 User Manual Page 59